• Prime Quality CRCA welded drawer with punched based.
• All models will have provision of stacking the cabinets, if required.
• Push-button high quality central locking
• Housings are finished in powder coated Grey colour.
• Floor fixing holes are pre-drilled.

• Fully welded rugged drawers.
• Full division form in sidewalls and punched base ensure the range of drawer dividers for maximise use of drawer space.
• Full width handles with integral lable holders.
• Load capacity of 100 kg UDL per drawer.
• Drawer fronts in range of Green, Blue or Red.

• A selection of recommended divider kits is available for all individual cabinet types and provides a quick way to select a range of effective dividers.
• Efficient drawer division greatly improves the space utilisation offered in tool cabinets.

Cabinet top and bottom are in square structure of 600x600 in width and depth; Cabinet height is variable from 400mm to 1000mm. The drawers are selected depending upon drawer front height of 50, 75, 100, 125, 150, 200 & 300mm.

Other than standard cabinet could be easily ordered as described in following example. No. Of drawers could be selected depending upon requirement & the height of cabinet selected.

To customize selection of drawer-fascia-height and number of drawers, the useful height is considered. The useful height of any cabinets is 100mm less than external height e.g. for 400mm cabinet height useable height will be 300mm which means drawer fascia of 1x50 mm, 1x100mm 7 1x150mm could be accommodate alternatively 2x150mm could be accommodated or 1x100mm & 1x200mm could be accommodated or lastly it could be just 1x300mm fascia height.