| 1 |
TABLE
FRAME |
Made
of E.R.W. M.S. square tubes 30x3Omm finished with
Epoxy Powder Coating. |
| 2 |
TABLETOP |
| Any
one of the following Three types: |
(A):
Made of 25mm thick marine blockboards with
teakwood leaping around all four edges. The
edges and top surfaces are lined with laminate. |
(B):
Made of l8mm thick marine blockboards with
teakwood leaping around all four edges. The
edges are lined with laminate and top surface
lined with ceramic tiles(Spartek Type) over
a layer of 4mm thick A.C. Sheet. |
(C):
Made of l7mm to 20mm thick Granite (standard
Available thickness). |
|
| 3 |
UNDERBENCH
STORAGE MODULES: (U.B.S.M.) |
IN
STEEL : Made of 18/20 G C.R.C.A. Sheets. Shutter
are made of 18G C.R.C.A. Sheets and remaining parts
made of 20G C.R.C.A. Sheet. Drawers are running
on roller slide channels. Shutter are fitted with
concealed hinges and quality locks. Complete module
is finished with powder coating. |
| |
TYPES
OF MODULES |
|
| |
A)
L - RANGE |
Suitable
for Instrument Tables of 750mmH. Module size : 560mmH
x 550mmD x Required Width. |
| |
(i)
L - 1S/450 |
With
one shutter and one shelf - 450mmW. |
| |
(ii)
L - 3D/450 |
With
Three shutters - 450mmW. |
| |
(iii)
L - 2S/900 |
With
Two shutters and one shelf - 900mmW. |
| |
|
|
| |
B)
H - RANGE |
Suitable
for Working Tables of 900mmH. Module size : 61Ornm
H x 550mm D x Required Width. |
| |
(i)
H - 1DAS/450 |
With
one drawer, one shutter and one shelf - 450mmW. |
|
(ii)
H - 4D/450 |
With
four drawers - 450mmW. |
| |
(iii)
H - 1D/2S/900 |
With
one drawer, Two shutters and one shelf - 900mmW. |
| |
(Iv)
H - 4D/900 |
With
Four drawers - 900mmW. |
| |
|
|
| 4 |
REAGENT
RACK |
Made
of 18G C.R.C.A. Sheets with two tier shelves with
complete powder coating finish. The rack is provided
with a service panel for running electrical and
Gas lines. The service panel is fitted with electrical
switch, sockets and Gas Taps. |
| 5 |
SINK
|
(A)
Stainless Steel OR (B) Porcelain. |
6 |
WATERTAP |
Brass
chromium plated swan neck 3 way Type water Tap. |
